How To Clean An Air Mattress?

Published on

In order to clean your air mattress of mold or mildew:

  • Wring out the fabric completely after dipping it in a solution of equal parts warm water and alcohol.
  • Use a cloth to scrub the moldy area.
  • Use a towel soaked in warm water to rinse the area.
  • To get rid of any remaining smell, spray a fabric disinfectant on the mattress.
Quick Answer

For you to use when camping or to provide visitors with a pleasant sleeping space while they stay at your house, air mattresses provide practical, simply storable alternatives.

However, if you’re like most people, you probably haven’t cleaned your air mattress in years despite owning it for that long.

Unfortunately, filth and mold tend to gather on blow-up mattresses.

If you don’t clean them often, they could develop an unpleasant odor and allergies and impair how well you or your visitors sleep.

This article will cover how to clean an air mattress, the importance of regular cleaning for these mattresses, and precautions you may take to avoid mold development.

The Benefits of Cleaning Your Air Mattress

If you’ve never thought about cleaning your air mattress, you may be unsure if routine cleaning is really required.

However, regular cleanings are necessary since a variety of pollutants may rapidly cause air mattresses to become soiled.

Your air mattress accumulates dirt, dust, and hair every time you put it up since it is on the floor.

Additionally, individuals who use your blow-up bed while they sleep leave behind perspiration and dead skin cells, which assemble over time.

Last but not least, storing your air mattress in a basement or closet may make it more likely for mold and mildew to develop there.

All of these impurities help keep your mattress clean overall.

How to Get Ready to Clean Your Air Mattress?

It’s crucial to set up your air mattress for cleaning.

Let’s say your visitors stayed for a week and then departed after resting on your mattress.

Your air mattress has to be completely cleaned before being stored.

If you put anything away unclean with the intention of cleaning it later, you are more likely to forget, and any scents or moisture left on it might seep in or foster mold or mildew growth.

#1. Remove It From The Source Of Power

Most contemporary air mattresses are inflated using an electric pump that may be powered by a wall outlet or a battery.

Make sure to disconnect your mattress from any electrical sources and move it away from any adjacent outlets before washing it.

For easier mobility, while cleaning your air mattress, if the pump is detachable, you should take it out of the bed.

You must exercise care if your air mattress has a built-in pump to avoid any liquid from harming the batteries.

#2. Take Off Every Sheet

The next step is to remove any covers, blankets, or sheets from the air mattress.

While you continue to clean the mattress itself, we advise putting them in the washing machine.

You should wash your air mattress’ bedding at least once every few weeks if you keep it set up all the time.

Your air mattress is on the ground, so with time, dust, dirt, and other debris may easily gather between the covers.

#3. Purge it

Before washing your mattress with a cleaning solution, you should lastly give your mattress a good vacuum to get rid of any exterior dust and grime.

While working on this, we advise keeping your mattress filled.

You could find it difficult to clean in the folds and wrinkles if you deflate the bed.

In order to thoroughly vacuum your air bed, carefully run the hose attachment along the top layer of the mattress.

Then proceed to vacuum the edges of the mattress before turning it over to clean the bottom.

Useful Cleaning Supplies for Air Mattresses

It’s time to collect your cleaning supplies now that your mattress is ready. Your desired level of cleaning will determine the precise products you need.

  • We advise using a warm water and dish soap solution if you just want to do a basic, thorough cleaning of a polyvinyl air mattress.
  • You will need vinegar and baking soda to get rid of scents if you want to get rid of cat or human pee stains on the bed.
  • Applying an equal mixture of water and rubbing alcohol to any polluted places is advised if you need to eradicate mold or mildew from the mattress.
What to Use for Cleaning an Air Mattress

Useful Cleaning Supplies for Air Mattresses

It’s time to collect your cleaning supplies now that your mattress is ready.

Your desired level of cleaning will determine the precise products you need.

We advise using a warm water and dish soap solution if you just want to do a basic, thorough cleaning of a polyvinyl air mattress.

You will need vinegar and baking soda to get rid of scents if you want to get rid of cat or human pee stains on the bed.

Applying an equal mixture of water and rubbing alcohol to any polluted places is advised if you need to eradicate mold or mildew from the mattress.

#1. Cleaning an Air Mattress

It’s time to start cleaning your air mattress right now.

To wash your mattress by hand using a towel immersed in your cleaning solution, whether you want to deep-clean it or just spot-clean it, follow these steps.

Never try to wash your air mattress in the washing machine unless the manufacturer’s instructions specifically specify that you may.

Here is additional information about blow-up bed drying, light cleaning, and thorough cleaning.

If the top layer of your air mattress is velvet, it’s recommended to simply spot-clean stains to prevent harming the fabric.

To spot-clean your mattress, just adhere to these instructions:

Your cleaning solution should be dipped into a washcloth or sponge, then squeezed out.

Work from the stain’s perimeter toward the center while lightly dabbing any spots with the cloth.

To get rid of any remaining soap, wet a clean towel with water and dab the affected areas.

On each stain, repeat this method.

If using the towel to gently clean the stains does not succeed, you may also try using a scrub brush with soft bristles.

#2. Deep Cleaning

If polyvinyl chloride or polyurethane plastics make up the majority of your air mattress, you may rest secure knowing that thorough cleaning it won’t harm the substance.

To carry out a regular thorough cleaning:

Take a clean cloth and dunk it in your cleaning agent.

To get rid of extra liquid, wring out the towel.

Use the cloth to clean the mattress, using more force to any spots that are very unclean or soiled.

Remove any surplus soap by wiping the area with a fresh, moist towel.

How to get a cat or human pee out of a mattress

To remove any urine, gently dab the area with a dry towel.

Sprinkle baking soda on the troublesome region, let it stay for a while, and then wipe it away.

Mix vinegar and water in equal amounts, and then apply the mixture to the contaminated area.

To remove the urine stain, repeat procedures two and three as necessary.

In order to clean your air mattress of mold or mildew:

Wring out the fabric completely after dipping it in a solution of equal parts warm water and alcohol.

Use a cloth to scrub the moldy area.

Use a towel soaked in warm water to rinse the area.

To get rid of any remaining smell, spray a fabric disinfectant on the mattress.

#3. Drying Out Your Air Mattress

Setting your air mattress outdoors to air dry in the sun is the finest and simplest method to dry it after cleaning.

However, you may also position your bed next to a fan to hasten the drying process if it’s chilly or wet outside.

Rubber or plastic mattresses should dry reasonably rapidly in the air.

However, it could take several hours for softer textiles like velvet and velour to dry completely.

Keeping the mattress inflated as it dries will save drying time by preventing moisture from building up in the folds.

How to Stop Mold or Mildew from Growing on Your Air Mattress?

The life of the mattress may be extended by completely preventing mold or mildew formation, which will save you money.

Here are some suggestions for avoiding mold growth on your air mattress:

After washing your bed, be careful to dry it completely before putting it in its storage spot.

Keep the air mattress in a dry, well-ventilated space to avoid moisture buildup within the folds.

Store the air mattress in a well-ventilated environment.

Use a cover: You may want to think about buying a vinyl zip cover if mold development is a persistent issue.

These covers are often machine-washable, enabling you to clean them periodically to avoid mold and keep the mattress clean.

Conclusion

Maintaining a clean, germ-free atmosphere for your visitors starts with routinely cleaning your air mattress.

We advise thoroughly cleaning your airbed at least once a year to keep it fresh, or more often if necessary to get rid of body odor, urine, or mold.

Fortunately, even a thorough cleaning of your mattress shouldn’t take more than 30 minutes.

Even better, household items like baking soda, dish detergent, and vinegar work well for cleaning mattresses.

Your efforts to maintain your mattress clean, safe, and allergen-free will be well worth them once you include this chore in your regular cleaning regimen.

Suggestion Videos from Youtube About Clean An Air Mattress

How to Care and Clean an Air Mattress | Missyee Home Series – i Missyee
Photo of author
Ryan is a RV product expert with nearly a decade of experience researching, developing, and testing RV products.

Leave a Comment